STRUMCO LTD
4718 90A Ave NW
Edmonton, AB T6B 2P9
Canada

Office: 780.468.0050

Email Us

Social Media

Visit Us On FacebookVisit Us On TwitterVisit Us On Google PlusVisit Us On Youtube

Kocsis-LogoHydraulic Starters

 

 

Check Out Our Hydraulic Starters At hydraulicstarters.ca

Kocsis Hydraulic Starters            

CMO (A1) Hydraulic Starter

Product Specifications

Flange type: SPECIAL

Flange to ring gear dimension: 0.098"

Number of teeth: 12

Diametral pitch: 8/10

Pinion outside diameter: 1.825"

Pressure angle: 20°

Rotation: Clockwise

Motor housing: Aluminum

Pinion housing: Aluminum

Barrel: Steel

Piston: Bronze Alloy

Number of pistons: 7

Displacement: 0.50 in³/REV

Speed range: 0-7000 RPM

Drive type: Inertia

Maximum working pressure: 3000 PSI

Duty cycle: Intermittent

Maximum torque: 15 Ft-lbs

Weight: 11.0 lbs

Overall volumetric efficiency: 92%

Recommended fluid: Red hydraulic fluid (MIL-H-5606)

CMA (A2) Hydraulic Starter

Product Specifications

Flange type: SAE#3

Flange to ring gear dimension: 2.00"

Number of teeth: 11

Diametral pitch: 6/8

Pinion outside diameter: 2.240"

Pressure angle: 20°

Rotation: Clockwise

Motor housing: Aluminum

Pinion housing: Ductile iron

Barrel: Steel

Piston: Bronze Alloy

Number of pistons: 7

Displacement: 1.35 in³/REV

Speed range: 0-7000 RPM

Drive type: Inertia

Maximum working pressure: 3000 PSI

Duty cycle: Intermittent

Maximum torque: 45 Ft-lbs

Weight: 17.0 lbs

Overall volumetric efficiency: 92%

Recommended fluid: Red hydraulic fl uid (MIL-H-5606)

CMD-2A (A3) Hydraulic Starter

Product Specifications

Flange type: SAE#3

Flange to ring gear dimension: 2.00"

Number of teeth: 11

Diametral pitch: 6/8

Pinion outside diameter: 2.250"

Pressure angle: 20°

Rotation: Clockwise

Motor housing: Aluminum

Pinion housing: Ductile iron

Barrel: Steel

Piston: Bronze Alloy

Number of pistons: 7

Displacement: 2.00 in³/REV

Speed range: 0-4500 RPM

Drive type: Inertia

Maximum working pressure: 3000 PSI

Duty cycle: Intermittent

Maximum torque: 72 Ft-lbs

Weight: 35.0 lbs

Overall volumetric effiiency: 92%

Recommended fluid: Red hydraulic fluid (MIL-H-5606)

CMD-3A (A4) Hydraulic Starter

Product Specifications

Flange type: SAE#3

Flange to ring gear dimension: 2.00"

Number of teeth: 12

Diametral pitch: 6/8

Pinion outside diameter: 2.250"

Pressure angle: 20°

Rotation: Clockwise

Motor housing: Aluminum

Pinion housing: Ductile iron

Barrel: Steel

Piston: Bronze Alloy

Number of pistons: 7

Displacement: 3.50 in³/REV

Speed range: 0-4500 RPM

Drive type: Inertia

Maximum working pressure: 3000 PSI

Duty cycle: Intermittent

Maximum torque: 120 Ft-lbs

Weight: 40.0 lbs

Overall volumetric efficiency: 92%

Recommended fluid: Red hydraulic fluid (MIL-H-5606)

CME-5A (A5) Hydraulic Starter

Product Specifications

Flange type: SAE#3

Flange to ring gear dimension: 2.00”

Number of teeth: 12

Diametral pitch: 6/8

Pinion outside diameter: 2.250”

Pressure angle: 20°

Rotation: Clockwise

Motor housing: Aluminum

Pinion housing: Ductile iron

Barrel: Steel

Piston: Steel alloy

Number of pistons: 9

Displacement: 5.88in³/REV

Speed range: 0-3000 RPM

Drive type: Inertia

Maximum working pressure: 3000 PSI

Duty cycle: Intermittent

Maximum Torque: 200 Ft-lbs.

Weight: 46.0 lbs

Overall volumetric efficiency: 92%

Recommended fluid: Red hydraulic fluid (MIL-H-5606) 

 

SA Industries Hydraulic Starters 

 

Check Out Our Hydraulic Starters At hydraulicstarters.ca

SA Industries hydraulic starters available at Strumco Air Starter mount to most popular oil & gas industrial engines. They are manufactured to strict engineering standards, enabling them to operate in the toughest of conditions.

SA-Industries pinion-heads

S.A. hydraulic starters are well suited to use in land and off-shore fracturing, cementing, pumping and power equipment.
All S.A. hydraulic starters feature friction clutch inertia drives; supplying high starting torque and maximum shock-absorbing ability that forgives even the harshest environments.

Helping you power your engines the first time every time.

  • Heavy duty drive housing
  • Inertia style bendix drive
  • Shock absorbing mounting adapter
  • Easy installation
  • Easily serviced
 
  • Wide selection of drive to flywheel configurations
  • Compatible with common engines
  • Oil field service rigs and off-shore engines
  • Standard SAE mounting flanges
  • Replacement parts

 

Model         Flange   Pinion  Rotation  Hydraulic motor mount  Engine Rating

SA300RH-3   SAE 3     12TH  CW      SAE B 4BOLT 4.00 PILOT    800-4500 CID

SA300RH-3
Hydraulic Motor Shaft   SAE C – 14 tooth, splined
Drive Pinion   12 tooth
Hyd. Motor Flange   SAE B – 4 bolt / 4.00- pilot
Engine Application   CAT 3512; Cummins QSK 50,
KTA19, DD 4000 Series

 

SA302RH-4      SAE 3    12TH   CW   SAE B 2BOLT 4.00   PILOT    800-1500 CID

SA302RH-4
Hydraulic Motor Shaft SAE B – 13 tooth, splined
Drive Pinion 12 tooth
Hyd. Motor Flange SAE B – 2 bolt / 4.00- pilot
Engine Application Detroit Diesel 12V71;CAT C18, 3408

 

SA300RH-1L38SP SAE 3 *  12TH   CW  SAE B 4BOLT 4.00 PILOT 800-4500 CID

SA300RH-1R38SP  SAE 3 *  12TH  CW  SAE B 4BOLT 4.00 PILOT  800-4500 CID

SA300RH-3 / R38SP
Hydraulic Motor Shaft SAE C – 14 tooth, splined
Drive Pinion 12 tooth
Hyd. Motor Flange SAE B – 4 bolt / 4.00- pilot
Engine Application Cummins QSK 45-50

 

 SA250RH-1     SAE 3    11TH   CW    SAE A 2BOLT 3.25 PILOT     250-800 CID

SA250RH-1
Hydraulic Motor Shaft SAE B – 13 tooth, splined
Drive Pinion 11 tooth
Hyd. Motor Flange SAE A – 2 bolt / 3.25- pilot
Engine Application CAT 3406; Cummins QSM11;
Detroit Diesel 60 Series

 

SA250RH-4     SAE 3   12TH     CW    SAE A 2BOLT 3.25 PILOT     250-800 CID

SA223RH-1    SAE 3    11TH     CW    SAE B 4BOLT 4.00 PILOT     250-800 CID

SA223RH-1
Hydraulic Motor Shaft SAE B – 13 tooth, splined
Drive Pinion 11 tooth
Hyd. Motor Flange SAE A – 4 bolt / 3.25- pilot
Engine Application CAT 3406; Cummins QSM11

 

SA223RH-2             SAE 3  12TH  CW     SAE B 4BOLT 3.25 PILOT  250-800 CID

SA223RH-1/HA01   SAE 3  11TH  CW     SAE A 2BOLT 3.25 PILOT  250-800 CID

SA223RH-1/HA02   SAE 3   11TH CW    SAE B 2BOLT 4.00 PILOT   250-800 CID

SA223RH-2/HA03   SAE 3   12TH   CW  SAE A 2BOLT 3.25 PILOT   250-800 CID

SA223RH-1 / HA02
Hydraulic Motor Shaft SAE B – 13 tooth, splined
Drive Pinion 11 tooth
Hyd. Motor Flange SAE B – 2 bolt / 4.00- pilot
Engine Application CAT 3406, C11

SA INDUSTRIES AIR MOTOR REPAIR KITS

Your preventive maintenance and repair programs will stay right on schedule with SA Industries tune-up kits and parts. SAI provides all the original equipment items you need to keep your hydraulic starters, air motors and pipe spinners running smooth and efficient. Critical replacement parts such as inertia drives, drive shafts and housings are available for your major overhauls. Repair Kits include key gaskets, seals and bearings that will restore your equipment to its top performance.

SAI also manufactures repair parts and kits for popular brands  Gast, Ingersoll-Rand, PSI, Kocsis and PowRQuik

Available Major Repair Kits

SAI-K208  Gast 6AM Series: 6AM-FRV-5A 6AM-NVR-7A 6AM-NRV-11A

SAI-K281  Gast 6AM Series: 6AM-NRV-22A NEMA 6AM-FRV-23A

SAI service kits are manufactured to the highest standards. Material and workmanship are subject to our strict Quality Control Process to insure proper form, fit and function, as well as your satisfaction.

       Service kits include:starter-parts

  • Shaft seal
  • o-ring
  • drive end bearing
  • ody gasket
  • push pins
  • vane springs
  • vanes
  • dead-end bearing
  • end-cap gasket.

        Repair kits include
       •  Bendix Drive, friction clutch inertia
       •  Bearings
       •  Seals
       •  O-rings
       •  Woodruff keys

SA Hydraulic Starter Adapters are available with or without a hydraulic gear-type motor. SAI will assist you in properly sizing a hydraulic motor to your engine application.

S.A. hydraulic starters are well suited to use in land and off-shore fracturing, cementing, pumping and power equipment.

All S.A. hydraulic starters available at Strumco Air Starter feature friction clutch inertia drives; supplying high starting torque and maximum shock-absorbing ability that forgives even the harshest environments.

Pow-R-Quik Hydraulic Starters

      

Check Out Our Hydraulic Starters At hydraulicstarters.ca

PRQ-HS Series

The PRQ HS series has been designed for the oil and gas service industry.

  • Gear type hydraulic motors.
  • Sold with or without hydraulic motors.
  • Heavy-duty friction clutch, inertial starter drives.
  • Sizes to fit most popular engines

HS-223/360 Gear Type Hydraulic Starters

Friction Clutch Inertia Drives
These starters are adapted from PRQ’s 23/24 and 60/61 series air starters.They can be purchased with or without motors. Both use friciton clutch starter drives.

6-HS-223  RHI Hydraulic  Starter
6-HS-223  RH2-1 Hydraulic  Starter
6-HS-223  RHI LM Hydraulic Starter-Less Motor
6-HS-223  RH2-1 LM Hydraulic  Starter-Less  Motor
6-HS-360  RHI Hydraulic  Starter  (Side  or Rear Port)
6-HS-360  RHI LM Hydraulic  Starter-Less  Motor
6-10-603 Smart-R-Valve  – HS-223  Series Soft Engage  Valve
6-10-601 Smart-R-Valve  – HS-360  Series Soft Engage  

Strumco Air Starter
Ph:  780.468.0050
sales@strumco.com