Kineteco SZHS/SZHR Spring Starters
SZHS/SZHR
Easy starting for large capacity engines
- Powerful Kineteco SZHS/SZHR Spring Starters with Z-drive offset gearbox
- Smooth action power spring for easy winding
- Standard SS/SR nosepieces with manual engagement and trip mechanism
- Standard SS/SR crank wind with detachable handle
Kineteco SZHS/SZHR Spring Starters are designed for engines from 1.25L to over 2L/cylinder, but are compact and flexible enough to fit smaller, difficult to start engines.
With its flexible Z-drive gearbox, the SZHS/SZHR series can be configured to give greater engine clearance.
SZHS/SZHR starters use the well-proven SS/HSS range nosepieces and winding mechanisms. With the manual engage and trip mechanism and detachable crank wind, the operator can choose exactly how the Kineteco SZHS/SZHR Spring Starters operates, even using it to turn the engine over slowly for inspection.
As with all , the SZHS/SZHR series bolts directly into the standard starter pocket on the engine. Given the correct engine configuration, all the electrics can be dispensed with. Fitting takes a matter of minutes, and operation of the spring starter does not require any special skill or strength. Unlike a directly hand-cranked engine, time can be taken to wind the starter, which can then be tripped when ready.
Marine, flame-proof and E-pack dual start options are available ensuring Kineteco SZHS/SZHR spring starters can be configured to meet customers’ exact requirements.
New engine applications are constantly being developed. For engines not listed, please contact us.
| Kineteco SZHS/SZHR Spring Starters | |
|---|---|
| Spring Starter Specification | |
| Description | SS/SR based spring starter with Z-Drive gearbox, heavy duty power spring, set and tripped by hand. Designed, manufactured by, and exclusive to, Kineteco |
| Rotation of Starter | SZHS = CW SZHR = CCW |
| Engine Capacity | Max. 6 cylinders, to over 2.25L per cylinder (subject to local environmental conditions and engine start-up load) |
| Torque (Range) | 29.5 – 112 Nm Incremental (gearing dependant) |
| No. of Output Turns | 5 – 19 Incremental (gearing dependant) |
| Output Energy | Nom. 2510 Joules |
| Cold Starting | To 5°C (41°F) starting aids may be required |
| Maximum Winding Load | 40Nm torque |
| To Wind Fully | 35 turns |
| Mounting Flange Types | SAE 1, SAE2/3, SAE 4/5, Ford. Can be customised |
| Pinions Available | Fellows stub 10/12, 8/10, 6/8; Module 2.5, 3.0. From 11 to 18 teeth. Can be customised |
| Winding Handle Position | Variable in 8.5° increments |
| Weight | 20kgs |
| Shipping Dimensions | 40 x 22 x 27 cm |
| Standard Equipment | Winding handle and handbook |
| Options – All models have the following options available | |
| F | Flameproof |
| E | E-pack for dual starter installations |
| M | Sealed version for marine environments |
